Reference Manual
Appendix
153
Load All without system. Are you
sure?
Confirms whether you want to load the “All without system” or not in the File mode.
Load All. Are you sure?
Confirms whether you want to load the “All” or not in the File mode.
Load Seq Chain file. Are you sure?
Confirms whether you want to load the “Seq Chain file” or not in the File mode.
MIDI buffer full.
Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error.
An error occurred when receiving bulk data.
Mixing Voice full.
The Mixing Voice cannot be stored because the number of Voices already stored has
exceeded the maximum capacity.
No read/write authority to the file.
No permission for reading/writing on the external storage device.
Now executing Factory set...
Please keep power on.
Indicates this synthesizer is restoring the factory-programmed settings.
Now loading...
Indicates that a file is being loaded.
Now receiving MIDI bulk data...
Indicates this synthesizer is receiving MIDI bulk data.
Now saving...
Indicates that a file is being saved.
Now scanning autoload file...
Scanning for the files specified for Auto Load.
Now transmitting MIDI bulk data...
Indicates this synthesizer is transmitting MIDI bulk data.
Overwrite. Are you sure?
A save operation will overwrite data on the external storage device as destination, and
this message confirms whether it is OK to continue or not. Press [ENTER] (Yes) or [EXIT]
(No) as required.
Part x is used for Drum Assign.
This message appears when the Part switches of all Parts are set to on, and the Drum
Assign function used Part “x” for the Drum Part in Performance mode.
Part x is used for Layer.
This message appears when the Part switches of all Parts are set to on, and the Layer
function used Part “x” for the Layer Part in the Performance mode.
Part x is used for Split.
This message appears when the Part switches of all Parts are set to on, and the Split
function used Part “x” for the Split Part in the Performance mode.
Please stop Audio Play/Rec.
The operation you have attempted to execute cannot be done during Audio Rec/Play
recording or playback.
Please stop sequencer.
The operation you have attempted to execute cannot be done during SEQ PLAY
playback.
Save Audio Rec file?
Confirming whether you want to save the recorded file or not in Audio Rec/Play mode.
Seq Chain stored.
This message appears when the Seq Chain settings has been stored.
Sequence memory full.
The internal memory for Sequence data is full, preventing any further operation (such as
recording, editing, Job execution, MIDI reception/transmission, or loading from the
external storage device).
Try again after erasing unwanted Song, Pattern, or User Phrase data.
Set Part 1 Ins Sw to on to use
Vocoder.
Set the Insertion Switch of Part 1 to on to use the Vocoder when setting the Output Select
of the A/D Input part to “Vocoder.”
MIDI data overload.
The amount of MIDI data is too large to play.
Store Voice?
Confirms you want to store the editing Voice when executing the Performance Creator
(Layer/Split/Drum Assign) feature to the editing Voice in the Voice mode.
The received MIDI bulk data’s type is
not compatible with the current mode/
voice type.
This message appears when MIDI bulk data is received in a different mode other than
the currently selected mode. The bulk data is received in the same mode as the
transmitting mode. This message also appears when the Voice type (Normal Voice/Drum
Voice) of the destination Mixing Parts is different from the bulk-dump-transferred Voice
type. The destination Parts assigned to the same Voice type as the bulk-dump-
transferred Voice type are selected.
This Performance uses User Voices.
The loaded Performance uses User Voices. Confirm whether the same Voices as at the
time of saving are stored at the same User Bank/Number or not.
USB connection terminated.
Press any button.
A break in the connection with the USB storage device has occurred because of an
abnormal electric current. Disconnect the USB storage device from the USB TO DEVICE
connector, then press any of the panel buttons.
Utility stored.
The settings in the Utility mode have been stored.
LCD Indication
Description