Reference Manual
Basic Structure
22
LFO Phase Difference
Determines the L/R phase difference of the modulated wave.
LFO Phase Reset
Determines how to reset the initial phase of the LFO.
LFO Speed
When any of the chorus effects, flanger effects, tremolo and ring modulator is selected, this parameter
determines the frequency of the modulation.
When “Tempo Phaser” or “Tempo Franger” is selected, this parameter determines the modulation speed
via a note type.
When “Auto Pan” is selected, this parameter determines the frequency of the Auto Pan.
LFO Wave
When any of the flanger effects and “Ring Modulator,” this parameter selects the wave for modulation.
When “Auto Pan” is selected, this parameter determines the panning curve.
When “VCM Auto Wah” is selected, this parameter selects the wave, sine or square.
Liveness
Determines the decay characteristic of Early Reflection.
Low Attack
Determines the amount of time from the moment a note is pressed to the moment the compressor is
applied to the low frequencies.
Low Gain
Determines the output gain for the low frequencies.
Low Level
Determines the output level for the low frequencies.
Low Mute
Determines whether the low frequency band is off or on.
Low Ratio
When “REV-X Hall” or “REV-X Room” is selected, this parameter determines the ratio of the low
frequencies.
When “Multi Band Comp” is selected, this parameter determines the ratio of the compressor for the low
frequencies.
Low Threshold
Determines the minimum input level at which the effect is applied to the low frequencies.
LPF Resonance
Determines the resonance of the low pass filter for the input sound.
Manual
When “VCM Flanger” is selected, this parameter determines the offset value of the delay modulation.
When “VCM Phaser mono” or “VCM Phaser stereo” is selected, this parameter determines the offset
value of the phase modulation.
Meter
Changes the meter.
Mic L-R Angle
Determines the L/R angle of the microphone.
Mid Attack
Determines the amount of time from the moment a note is pressed to the moment the compressor is
applied to the mid frequencies.
Mid Gain
Determines the output gain for the mid frequencies.
Mid Level
Determines the output level for the mid frequencies.
Mid Mute
Switches the mute status of the mid frequencies.
Mid Ratio
Determines the ratio of the compressor for the mid frequencies.
Mid Threshold
Determines the minimum input level at which the effect is applied for the mid frequencies.
Mix
Determines the volume of the effect sound.
Mix Level
Determines the level of the effect sound mixed to the dry sound.
Mod Depth
Determines the depth of the modulation.
Mod Depth Ofst R
Determines the depth of the modulation for R channel as offset.
Mod Feedback
Determines the feedback level to the modulation.
Mod Gain
Determines the gain of the modulation.
Mod LPF Cutoff Frequency
Determines the cutoff frequency of the low pass filter applied to the modulated sound.
Mod LPF Resonance
Determines the resonance of the low pass filter for the modulated sound.
Mod Mix Balance
When “Noisy” is selected, this parameter determines the mix level of the modulated element.
When “Tech Modulation” is selected, this parameter determines the volume of the modulated sound.
Mod Speed
Determines the modulation speed.
Mod Wave Type
Selects the wave type for modulation.
Mode
Determines the phaser type, or more specifically, the factor for forming the phaser effect.
Modulation Phase
Determines the L/R phase difference of the modulated wave.
Move Speed
Determines how long it takes to move the sound from the current status to the sound specified via the
Vowel parameter.
Noise Level
Determines the noise level.
Noise LPF Cutoff
Frequency
Determines the cutoff frequency of the low pass filter applied to the noise.
Noise LPF Q
Determines the resonance of the low pass filter applied to the noise.
Noise Mod Depth
Determines the depth of the noise modulation.
Noise Mod Speed
Determines the speed of the noise modulation.
Noise Tone
Determines the characteristics of the noise.
On/Off Switch
Turns the isolator on or off.
OSC Frequency Coarse
Determines the frequency at which the sine wave modulates the amplitude of the input wave.
OSC Frequency Fine
Determines the frequency finely at which the sine wave modulates the amplitude of the input wave.
Output
Determines the level of the signal output from the effect block.
Output Gain
Determines the gain of the signal output from the effect block.
Output Level
Determines the level of the signal output from the effect block.
Output Level 1, 2
Determines the level of the signal output from the 1st block and 2nd block respectively.
Over Drive
Determines the degree and character of the distortion effect.
Pan 1, 2
Determines the pan for each of the 1st series and 2nd series.
Pan AEG Min Level
This parameter of the Slice effect determines the minimum level of the AEG applied to the panned
sound.
Parameter name
Descriptions