background image

Reference Manual

Basic Structure

4

Basic Structure

Functional Blocks

Tone Generator

A/D Input

Arpeggio

Sequencer

Audio Record/Play

Controller

Effect

Internal Memory

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Appendix

About MIDI

Display Messages

Troubleshooting

Drum Voice

Drum Voices are mainly percussion/drum sounds that are assigned to individual notes on the keyboard. 

A collection of assigned percussion/drum waves or Normal Voices is known as a Drum Kit. 

Unlike Elements, the Drum key is equivalent to the corresponding note, meaning that you cannot 

change its range. Drum or percussion sounds are assigned to each Drum Key. You can create various 

types of Drum Voices by changing the drum or percussion sound assigned to each key and edit the 

parameters such as pitch and EG.

Expanded Articulation (XA) is a specially designed tone generation system that provides greater 

performance flexibility and acoustic realism. 

This feature, adopted from the MOTIF XS synthesizer, allows you to more effectively recreate realistic 

sound and natural performance techniques—such as legato and staccato—and provides other unique 

modes for random and alternate sound changes as you play.

Realistic legato performance

Conventional synthesizers recreate a legato effect by continuing the volume envelope of a previous note 

on to the next one, in the mono mode. However, this results in an unnatural sound different from that of 

an actual acoustic instrument. Like the technology of the MOTIF XS series, the S90 XS/S70 XS more 

accurately reproduces a legato effect by allowing specific Elements to be sounded when playing legato 

and other Elements to be played normally (with the XA Control parameter settings “normal” and 

“legato”).

Authentic note release sound

Conventional synthesizers are not good at realizing the sound produced when the note of the acoustic 

instrument is released. The S90 XS/S70 XS realizes the sound produced when the note of the acoustic 

instrument is released, by setting the XA Control parameter of a certain Element to “key off sound.”

Subtle sound variations for each note played

Conventional synthesizers attempt to reproduce this by randomly changing the pitch and/or filter. 

However, this produces an electronic effect and is different from the real sound changes on an acoustic 

instrument. The S90 XS/S70 XS more accurately reproduces these subtle sound variations by using the 

XA Control parameter settings, “wave cycle” and “wave random.”

Switching among different sounds to recreate the natural performance on an 
acoustic instrument

Acoustic instruments have their own unique characteristics—even specific, unique sounds that are 

produced only at certain times in a performance. These include the flutter tonguing on a flute or the 

playing of high harmonics on an acoustic guitar. Conventional synthesizers (before the MOTIF XS 

series) could realize such sounds, for example, by triggering them through high (strong) velocity. The 

S90 XS/S70 XS, on the other hand, recreates these special sounds by allowing you to switch between 

the sounds while you play-using the ASSIGNABLE FUNCTION buttons and the XA Control parameter 

settings, “AF 1 on,” “AF 2 on” and “all AF off.” This gives you a level of natural, expressive control 

previously unavailable.

NOTE

You can turn the ASSIGNABLE FUNCTION [1]/[2] button on or off also by transmitting the Control Change 
number specified as “A Func 1/2 Ctrl No.” (

page 139

in the Utility Controller display from an external device.

New sounds and new styles of playing

The highly versatile functions above can be applied effectively not only to acoustic sounds but also to 

synthesizer and electronic Voices as well. The XA feature opens up enormous potential for realizing 

authentic sounds, performing expressively and coming up with creative new styles of playing.

Expanded Articulation (XA)

C0

C1

C6

Individual drum sounds 

(different for each key)

Key 1  Key 5  Key 10 Key 18

Key 73

Summary of Contents for S70 XS

































































































































































Reviews: