Reference Manual
Reference
48
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Fine Scaling (Fine Scaling Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the pitch in fine tuning (set
above) of the selected Element, assuming C3 as the basic pitch. A positive setting will cause the pitch of lower notes to
change lower and that of higher notes to change higher. A negative setting will have the opposite effect.
Settings:
-64 – +0 – +63
Random
This lets you randomly vary the pitch of the Element for each time a Note On message is received. The higher the value,
the greater the pitch variation. A value of “0” results in no pitch change.
Settings:
0 – 127
Pitch Key Follow Center Key
Determines the central note number for Pitch Key Follow. The note number set here is the same pitch as normal
regardless of the Pitch Key Follow setting.
Settings:
C -2 – G8
Pitch Key Follow (Pitch Key Follow Sensitivity)
Determines the sensitivity of the Key Follow effect (the pitch
interval of adjacent notes), assuming the pitch of the “Pitch Key
Follow Center Key” as standard. At +100% (the normal setting),
adjacent notes are pitched one semitone (100 cents) apart. At
0%, all notes are the same pitch specified as the Center Key. For
negative values, the settings are reversed.
Settings:
-200% – +0% – +200%
NOTE:
This parameter is useful for creating alternate tunings, or for use
with sounds that do not need to be spaced in semitones, such as
pitched drum sounds in a Normal Voice.
Time
Determines the Pitch EG transition time. The Time parameters let you set the time between the adjoining points of the
Level parameters below. A higher value results in a longer time until reaching the next level.
Settings:
0 – 127
Level
Determines the level settings for the Pitch EG. The Level parameters let you set the amount of the pitch deviation based
on the standard pitch specified at the Coarse Tuning and Fine Tuning in the Tune display at each envelope point.
Settings:
-128 – +0 – +127
PEG (Pitch EG)
Hold Time
Determines the time between the moment you press a note and the
moment the envelope starts to rise.
Attack Time
Determines the speed of attack from the initial pitch (Hold Level) to
the normal pitch (Attack Level) of the Voice after the hold time has
elapsed.
Decay 1 Time
Determines how fast the envelope falls from the normal pitch
(Attack Level) of the Voice to the pitch specified as the Decay 1
Level.
Decay 2 Time
Determines how fast the envelope falls from the pitch specified as
the Decay 1 Level to the pitch specified as the Decay 2 Level.
Release Time
Determines how fast the envelope falls to the pitch specified as the
Release Level when the note is released.
Hold Level
Determines the initial pitch at the moment of the note is pressed.
Attack Level
Determines the normal pitch of the pressed note.
Decay 1 Level
Determines the level which the pitch of sound reaches from the Attack Level after the Decay1 time elapses.
Decay 2 Level
Determines the sustain-level pitch which will be maintained while a note is held.
Release Level
Determines the final pitch reached after the note is released.
+
–
Pitch Key Follow and Center Key
When Pitch Key Follow is set to 100%
Large
Small
Lower range
Center Key = C3
Higher range
Amount of pitch
change
0
Pitch
Hold
Level
Attack
Level
Decay 1
Level
Decay 2
Level
Release
Level
Release
Time
Decay2
Time
Hold
Time
Attack
Time
Decay1
Time
Pressing a key (Note On)
Releasing a key (Note Off)
Time
