5
SB168-ES and LS9 Quick Setup Guide
Devices being connected on a EtherSound network
will be displayed on the “List” view.
Select any SB168-ES device.
Note: Devices are listed in order by their MAC address in
the default state, but can be named in the “Properties”
page for easier operation.
The “Properties” page of SB168-ES is displayed
on the screen.
Click the [Control] tab to open the “Control” Page
of SB168-ES.
In the Quick Setup area
- Select [MY16-ES64 Slot Internal Connection
(LS9)].
- Select [Daisy Chain]. (See Appendix G for
Ring setup information)
- Click the [APPLY] button.
After the confirm box is checked all the network
patching is done. HA control routing is setup and
all information is saved to the EtherSound
devices so they will remember after AVS-
ESMonitor is disconnected or the power is cycled.
