10
Appendix
Appendix C: Manual patch of LS9
Input patching
When the LS9 is in its default state, rear panel Input jacks 1-32 (1-16) are patched to Input
channels 1-32 (1-16). The Slot(s) are patched to the second layer. However, input patching
can be changed as desired.
This example explains how to patch Slot in ports to Input channels 1-32 (1-16) manually.
Move the cursor to the Port select popup button, and
press the [ENTER] key.
Select SLOT1.
Select port 1 of SLOT1.
Port 1 of SLOT1 has been assigned to Input channel 1.
Assign other slot inports as shown below using the same
way.
Input patching by loading SB_LS932.L9A session file
Input port 1-16 of SLOT1 - Input channels 1-16
Input port 1-16 of SLOT2 - Input channels 17-32
