For Service Engineer
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
18/273
No.
Jig No.
Jig Name
Photo
10
JG-297
Stocker Level Teaching Jig
(For High-Speed or Middle Size
and Odd Shape Stocker)
11
JG-298
Stocker Level Teaching Jig
(For Multi-Functional Stocker)
12
-
Leveling Instrument
(3 pcs)
13
-
Leveling Instrument Block Jig
(2 pcs)
Note:
(a) The use of JG-294 is not available because the applicable height for No. 1 JG-0342 jig
(Height 105mm for G5S/G5S
II
) is different from that for JG-294 (Height 104mm for SIGMA-G5).
(b) For
the
nozzles for high-speed head, only the nozzles dedicated to the SIGMA series machines,
can
be used. (The nozzles for GXH-1 or 3, cannot be attached because their flange shape is not
appropriate for it).
(c) The
jigs other than teaching jig No. 1, are commonly used with those for Sigma-G5.
(d)
In addition to the above jigs, the accuracy measurement nozzles, accuracy measurement chip
components and mirror should be prepared.
NOTICE
When accuracy measurement is required, a nozzle appropriate for
the chip component should be prepared.
