MIDI Device Setup
You will need to specify the MIDI device drivers through which your computer will
communicate with your musical instrument. Follow the procedure below.
n
If you are using a Macintosh, refer to the section “
MIDI Port Setup (Windows)
1. Select “MIDI Port Setup” from the “Setup” menu.
The “MIDI Port Setup” dialog box is displayed.
2. Click on each of the “
▼
” buttons for the “MIDI IN Port” or “MIDI OUT
Port”, select the MIDI driver from the drop-down list that is displayed.
• If the musical instrument’s MIDI terminals are connected to the computer via a MIDI
interface.
For both the “MIDI IN Port” and “MIDI OUT Port”, select the MIDI driver that is compatible
with the MIDI interface you are using. For more information, refer to the manual that came
with your MIDI interface.
• If the musical instrument’s TO HOST terminal is connected directly to the
computer’s serial port.
Select the “Yamaha CBX Driver” for the “MIDI IN Port”, and the “Yamaha CBX A Driver” for
the “MIDI OUT Port”.
n
YAMAHA CBX Driver must be installed beforehand.
3. Click [OK].
4
SongFiler_E.qx 4/12/01 4:14 PM Page 4
