26
SHS-300 Owner’s Man
u
al
Setting Up for MIDI Operation
By connecting the instrument to a computer (or smart device) with a USB cable, MIDI data can be
transferred between the instrument and the computer.
NOTICE
• Make sure to use only the USB cable included with the instrument.
• The USB hub must be self-powered (with its own power source).
NOTE
For smart device connection, see the illustration on page 24.
1.
Turn off the power of the instrument, and then connect your computer or a smart
device to the instrument with the USB cable.
Read and follow the USB hub instruction manual for proper connection setup.
2.
Turn on the power of the instrument.
3.
Set the “USB MIDI” function to ON (page 29).
While holding down the [FUNCTION] button, press the C5 key.
CAUTION
• Before using a USB hub, be sure to read the relevant precautions.
• Use only a USB hub compatible with the USB standard for power supply.
Output voltage 4.8V - 5.2V
Output current 1.0A or greater
SHS-300
USB ca
b
le
Self-powered
USB h
ub
Comp
u
ter
AC o
u
tlet
Summary of Contents for sonogenic SHS-300
Page 37: ...SHS 300 Owner s Manual 37 ...
Page 40: ...40 SHS 300 Owner s Manual ...
Page 42: ......
Page 43: ......