6
SHS-500 Owner’s Man
u
al
inspected by qualified Yamaha service
personnel.
• Never insert or remove an electric plug with
wet hands.
Fire warning
• Do not put burning items, such as candles, on
the unit.
A burning item may fall over and cause a fire.
Battery
• Follow the precautions below. Failure to do so
might result in explosion, fire, overheating or
battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are
not designed to be charged.
- Keep the batteries separate from metallic
objects such as necklaces, hairpins, coins,
and keys.
- Use the specified battery type (page 35)
only.
- Use new batteries, all of which are the same
type, same model, and made by the same
manufacturer.
- Always make sure all batteries are inserted in
conformity with the +/- polarity markings.
- When the batteries run out, or if the
instrument is not to be used for a long time,
remove the batteries from the instrument.
- When using Ni-MH batteries, follow the
instructions that came with the batteries. Use
only the specified charger device when
charging.
• Keep batteries away from small children who
might accidentally swallow them.
• If the batteries do leak, avoid contact with the
leaked fluid. If the battery fluid should come in
contact with your eyes, mouth, or skin, wash
immediately with water and consult a doctor.
Battery fluid is corrosive and may possibly
cause loss of sight or chemical burns.
If you notice any abnormality
• When one of the following problems occur,
immediately turn off the power switch and
disconnect the electric plug from the outlet. (If
you are using batteries, remove all batteries
from the instrument.) Then have the device
inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or
damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the
instrument.
- There is a sudden loss of sound during use
of the instrument.
CAUTION
Always follow the basic precautions listed
below to avoid the possibility of physical
injury to you or others, or damage to the
instrument or other property. These
precautions include, but are not limited to,
the following:
Power supply/AC adaptor
• Do not connect the instrument to an electrical
outlet using a multiple-connector. Doing so
can result in lower sound quality, or possibly
cause overheating in the outlet.
• When removing the electric plug from the
instrument or an outlet, always hold the plug
itself and not the cord. Pulling by the cord can
damage it.
• Remove the electric plug from the outlet when
the instrument is not to be used for extended
periods of time, or during electrical storms.
Location
• Do not place the instrument in an unstable
position where it might accidentally fall over.
• Before moving the instrument, remove all
connected cables, to prevent damage to the
cables or injury to anyone who might trip over
them.
DMI-5
2/3
