Instrument an
d
control functions
4-12
4
2. Place the seat in the original posi-
tion, and then tighten the bolts.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU14283
Helmet hol
d
er
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
WARNING! Never ri
d
e with a
helmet attache
d
to the helmet hol
d
-
er, since the helmet may hit o
b
jects,
causin
g
loss of control an
d
possi
b
ly
an acci
d
ent.
[EWA10162]
EAU14885
A
d
justin
g
the shock a
b
sor
b
er
assem
b
lies
WARNING
EWA10211
Always a
d
just
b
oth shock a
b
sor
b
er
assem
b
lies equally, otherwise poor
han
d
lin
g
an
d
loss of sta
b
ility may re-
sult.
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Adjust the spring preload as follows.
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.
Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
1. Helmet holder
2. Unlock.
2
1
UB9FEYE0.book Page 12 Monday, July 12, 2021 5:47 PM