12
En
Listening to the sound from a
Bluetooth
device
You can play back wirelessly from
Bluetooth
devices, such as smartphones or digital
music players.
See also the operating manual of the
Bluetooth
device for more details.
Pairing a
Bluetooth
device with the unit
When connecting to a
Bluetooth
device for the first time, “pairing” between the device
and unit is required. Once “pairing” with a device is completed, subsequent connection
with that device will not require “pairing.”
1
Press the BLUETOOTH key on the supplied remote control to select
Bluetooth
as the input source.
The BLUETOOTH indicator on the front panel lights up in green.
2
Turn on the
Bluetooth
function of the device to be paired, and
perform pairing.
The operation varies depending on the device. Refer to the operation manual of the
device.
3
Select “SRT-1000 Yamaha” in the
Bluetooth
device list on the device.
If a passkey (PIN) is required, enter the number “0000.”
When pairing is completed,
or a completion message appears on the device.
NOTE
• Perform pairing with the
Bluetooth
device and unit within 10 meters (33 ft) of each other.
• Up to eight
Bluetooth
devices can be paired with the unit. If a ninth device is paired, the oldest pairing
information is deleted.
• If pairing information for a device is deleted, to use that device again, pairing of the device is required
again.
• If a
Bluetooth
device is already connected to the unit, terminate that
Bluetooth
perform pairing with the new device.
” (p.20) in “Troubleshooting” if pairing cannot be achieved.
Perform the following steps to use a
Bluetooth
device with the unit.
Bluetooth
devices
Playing back audio from a
Bluetooth
device on the unit
For the first
Bluetooth
connection
Pairing a
Bluetooth
device
with the unit
For subsequent
Bluetooth
connection
Lights up
