8
Studio Manager for V2 DM2000 Editor—Owner’s Manual
•
Changing Aux Send mode (Fixed/variable) on the console
•
Starting automix recording or playback on the console
•
Changing the sampling frequency (operated on the device)
•
Changing the User Assignable Layer settings (operated on the device)
Other Functions
Copy & Paste Function
You can copy and paste not only the characters but the control positions in Studio Manager.
In the Console Setup window (
), you can also specify the parameters to be copied.
The following table describes how to use the Copy & Paste function.
Resetting to the default value (Ctrl (
) + click)
Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click
the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –
∞
, or
reset a pan setting to Center).
Ctrl(
)+Shift+Click
Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and
<Shift> key and click the mouse button to reset the value to the nominal level.
Note: You cannot Undo or Redo the following operations:
• Edits in the Setup window
• Synchronization
• Opening and closing the windows
• Resizing the windows
Note: In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel
the preceding operations.
Copying characters
Select copy source characters, right-click (<control>+click), then choose
[Copy].
Pasting characters
Move the cursor to the copy destination, right-click (<control>+click), then
choose [Paste].
Copying a channel
Right-click (<control>+click) a copy source channel, then choose [Copy].
Pasting a channel
Right-click (<control>+click) the copy destination channel, then choose
[Paste].
