English
NOTICE
SWR2100P-10G/SWR2100P-5G Owner’s Manual
7
NOTICE
To avoid the possibility of malfunction/
damage to the product, damage to data, or
damage to other property, follow the notices
below.
Handling and maintenance
• Do not touch any port with your fingers or
anything metallic. Failure to observe this
precaution could result in damage to the
product.
• Do not use the device in the vicinity of a
TV, radio, AV equipment, mobile phone, or
other electric devices. Otherwise, the
device, TV, or radio may generate noise.
• Do not expose the device to excessive
dust or vibration, or extreme cold or heat
(such as in direct sunlight, near a heater,
or in a car during the day), in order to
prevent the possibility of panel
disfiguration, unstable operation, or
damage to the internal components.
• Do not place vinyl, plastic or rubber
objects on the device, since this might
discolor the panel.
• When cleaning the device, use a dry and
soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Condensation can occur in the device due
to rapid, drastic changes in ambient
temperature—when the device is moved
from one location to another, or air
conditioning is turned on or off, for
example. Using the device while
condensation is present can cause
damage. If there is reason to believe that
condensation might have occurred, leave
the device for several hours without
turning on the power until the
condensation has completely dried out.
• Be sure to earth (ground) any static
electricity from your body or clothing
before touching the product. Failure to
observe this precaution could result in
damage to the product.
• Do not install the product in a location
where magnetic fields are strong.
Otherwise, it might cause the product to
malfunction.
• Do not connect any noise generating
devices on the same power line as the
product. Failure to observe this precaution
could result in a malfunction or damage to
the product.
• Do not locate any connected LAN cables
close to the power cord. Otherwise, high
voltage might be induced, resulting in
malfunction.
• A 1000BASE-T connection will require an
Enhanced Category 5 (CAT5e) or better
LAN cable.
• The rubber feet included in this package
can be attached to the device to prevent
slippage when it is to be used on a
slippery surface.
About functions/data bundled with the
device
• This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may
be required to take adequate measures.
(CISPR22)
Regarding disposal
• This product contains recyclable
components.
When disposing of this product, please
contact the appropriate local authorities.
