–11–
CABLE ROUTING
SPEC
1
Head light lead
2
Wireharness
3
Meter light lead
4
Throttle cable
5
Throttle stop screw cable
6
Vacuum hose (#2)
7
Vacuum hose (#1)
8
Fuel tank breather hose
9
Fuel hose
10
Carburetor air vent hose
11
Carburetor breather hose
12
Fuel tank drain hose
13
Fuel hose
14
Fuel sender lead
15
Starter motor lead
16
Battery positive lead
17
Battery negative lead
18
Coolant reservoir breather hose
19
Coolant reservoir hose
20
Fuel hose
21
Carburetor breather hose
22
Cylinder head breather hose
23
Air filter case breather hose
A Fasten the meter lead, headlight
lead wireharness with a clamp.
B Fasten the wireharness, coolant
reservoir hose with a clamp.
C Fasten the fuel hose with a clamp.
D Route the starter relay lead and
fuel sender lead through the guide
of bracket.
E Connect the coupler and insert the
protector.
F Fasten the taillight lead to the tail-
light bracket above left taillight with
a clamp and end of clamp is down-
ward.
G 50 mm