background image

3

TF-RACK

 

Quick Guide

Explanation of Graphical Symbols

Explication des symboles

The lightning flash with arrowhead symbol within 

an equilateral triangle is intended to alert the 

user to the presence of uninsulated “dangerous 

voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of 

electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle 

équilatéral est destiné à attirer l’attention de 

l’utilisateur sur la présence d’une « tension dangereuse 

» non isolée à l’intérieur de l’appareil, pouvant 

être suffisamment élevée pour constituer un risque 

d’électrocution.

The exclamation point within an equilateral 

triangle is intended to alert the user to the 

presence of important operating and maintenance 

(servicing) instructions in the literature 

accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle 

équilatéral est destiné à attirer l’attention de 

l’utilisateur sur la présence d’instructions 

importantes sur l’emploi ou la maintenance 

(réparation) de l’appareil dans la documentation 

fournie.

The above warning is located on the top of the unit.

L’avertissement ci-dessus est situé sur le dessus de l’unité.

PRÉCAUTIONS 

CONCERNANT LA 

SÉCURITÉ

1  Lire ces instructions.
2  Conserver ces instructions.
3  Tenir compte de tous les avertissements.
4  Suivre toutes les instructions.
5  Ne pas utiliser ce produit à proximité d’eau.
6  Nettoyer uniquement avec un chiffon propre et sec.
7  Ne pas bloquer les orifices de ventilation. Installer l’appareil 

conformément aux instructions du fabricant.

8  Ne pas installer l’appareil à proximité d’une source de chaleur 

comme un radiateur, une bouche de chaleur, un poêle ou tout 
autre appareil (y compris un amplificateur) produisant de la 
chaleur.

9  Ne pas modifier le système de sécurité de la fiche polarisée 

ou de la fiche de terre. Une fiche polarisée dispose de deux 
broches dont une est plus large que l’autre. Une fiche de 
terre dispose de deux broches et d’une troisième pour le 
raccordement à la terre. Cette broche plus large ou cette 
troisième broche est destinée à assurer la sécurité de 
l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible 
avec les prises de courant disponibles, faire remplacer les 
prises par un électricien.

10  Acheminer les cordons d’alimentation de sorte qu’ils ne soient 

pas piétinés ni coincés, en faisant tout spécialement attention 
aux fiches, prises de courant et au point de 
sortie de l’appareil.

11  Utiliser exclusivement les fixations et 

accessoires spécifiés par le fabricant.

12  Utiliser exclusivement le chariot, le stand, le 

trépied, le support ou la table recommandés 
par le fabricant ou vendus avec cet appareil. 
Si l’appareil est posé sur un chariot, déplacer 
le chariot avec précaution pour éviter tout 
risque de chute et de blessure.

13  Débrancher l’appareil en cas d’orage ou lorsqu’il doit rester 

hors service pendant une période prolongée.

14  Confier toute réparation à un personnel qualifié. Faire réparer 

l’appareil s’il a subi tout dommage, par exemple si la fiche ou le 
cordon d’alimentation est endommagé, si du liquide a coulé ou 
des objets sont tombés à l’intérieur de l’appareil, si l’appareil 
a été exposé à la pluie ou à de l’humidité, si l’appareil ne 
fonctionne pas normalement ou est tombé.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE 
ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À 
L’HUMIDITÉ.

UL60065_03:

IMPORTANT SAFETY  

INSTRUCTIONS

1  Read these instructions.
2  Keep these instructions.
3  Heed all warnings.
4  Follow all instructions.
5  Do not use this apparatus near water.
6  Clean only with dry cloth.
7  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

9  Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than 
the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided 
for your safety. If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete outlet.

10  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

11  Only use attachments/accessories specified by 

the manufacturer.

12  Use only with the cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

13  Unplug this apparatus during lightning storms 

or when unused for long periods of time.

14  Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate 
normally, or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

UL60065_03:

Summary of Contents for TF-Rack





























Reviews: