C. Install of controller stand
a. Take out the controller stand from assessor box and remove the plastic bag.
b. Loose the 4 screws of the side board with Phillips screwdriver.
c. Match the end of controller stand to the hold on side board. Tighten the 4 screws with Phillips
screwdriver.
d. Take the controller from the foot stand. Remove the plastic bag and put it on the stand.
D
. Make sure there
’s enough room for extent of massage chair.
There must have enough room for lie down of band rest and rise up of foot rest
of massage chair when place it. Make sure there are 30 Cm in front and 50 cm in
the back.
P.8
50Cm
30Cm
