Instrument and control functions
5-13
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3. To set the traction control system
to “OFF”, push the select switch
“
” side for 2 seconds.
4. To set the traction control system
to “ON” again, push the select
switch “
” for one second.
TIP
When the vehicle is powered on, the
traction control system is automatically
set to “ON”.
5. When you finished changing the
settings, push the “MENU” switch
to return to the menu screen.
Resetting the maintenance coun-
ters
1. Use the select switch to highlight
“Maintenance”.
2. Push the “MENU” switch, and then
use the select switch to select the
item to reset.
3. While the selected item is flashing,
push the select switch “
” for one
second.
4. When you finished resetting, use
the select switch to highlight “
”,
and then push the “MENU” switch
to return to the menu screen.
Selecting the units
TIP
U.K. specification vehicles only: This
BV1-9-E2.book 13 ページ ２０１８年８月２８日 火曜日 午後５時２８分
