TA3 SH3 SC3 Owner’s Manual
61
5
Connecting to Other Devices
Connecting with the smart device app “Smart Pianist”
By connecting a smart device such as a smartphone or tablet and using the Smart Pianist app, you can view the score of
the preset Songs on the smart device, record your performance to the smart device, and perform other convenient
operations. The intuitive visual interface helps you to confirm the current settings of the instrument.
For details on the app and compatible devices, see the website below or search “Yamaha Smart
Pianist” on a web search engine.
https://www.yamaha.com/kbdapps/
After installing the Smart Pianist app on your smart device, connect this instrument to the device
via USB cables, Bluetooth or Wi-Fi.
NOTICE
•
All settings on the instrument are replaced by the settings on Smart Pianist when the instrument is connected with Smart
Pianist.
•
Do not place the smart device in an unstable position. Doing so may cause the device to fall and result in damage.
Connecting via USB cables
You can connect a smart device to the [USB TO HOST] terminal by using USB cables. For details on connection, refer to
the “Smart Pianist User Guide” on the website (page 11).
NOTICE
Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.
Connecting via Bluetooth
Before using the Bluetooth function, be sure to read “About Bluetooth” on page 8. Depending on the country in which you
purchased the product, the instrument does not have Bluetooth capability.
NOTE
• To connect via Bluetooth, make sure that the Bluetooth function is turned on (Bluetooth lamp is lit). It is set to on by default. The
Bluetooth on/off setting can be changed in Function F7.5 (page 51).
• This instrument cannot transmit audio data to the smart devices via Bluetooth. Thus, when the device is connected by Bluetooth, you
cannot record in audio format by using Smart Pianist. If you want to record while Bluetooth connection is enabled, record in MIDI format.
You can record in audio format when the instrument is connected to the smart device in a method other than Bluetooth.
1
Make the Bluetooth Audio function settings on this instrument to receive audio data
(page 59).
2
Connect with the smart device via Bluetooth MIDI by using Smart Pianist.
For details on connection, refer to the “Smart Pianist User Guide” on the website (page 11). When the connection
is successful, the MIDI data can be transmitted/received between the instrument and the smart device.
TA3
SH3
SC3
Summary of Contents for TransAcoustic TA3
Page 4: ...TA3 SH3 SC3 Owner s Manual 4...
Page 85: ......