6
En
CONNECTING AN iPod
Set your iPod in the iPod dock.
y
An iPod is charged when set in the iPod dock.
During power save mode, the iPod is not
charged.
• To secure the connection, attach a compatible
Dock Adapter supplied with the iPod or an
iPod Universal Dock Adapter (sold
separately), and remove the protective case
covering from your iPod.
• If you do not use an adapter or if the adapter
is not compatible, the connection could be
loose or poor, which could cause damage or
malfunctions. For details on dock adaptor
information, please visit official Apple’s
website.
• If an iPod in protective case is connected by
force, the connector may be damaged.
Remove the protective case before
connection.
• Attach the dock cover to the iPod dock
whenever you are not using it.
ADJUSTING THE CLOCK
1
Set
CLOCK
to SET.
2
Set the time.
Press
–
/
+
to set the hour and then
press
ENTER
.
Set the minutes in the same way.
y
• While setting the clock, press
RETURN
to return to the previous setting.
• Press
SNOOZE/SLEEP
on the front
panel to switch between the 12 and 24
hour clock display.
3
Set
CLOCK
to ON to complete.
At the time ON is set, it will be 00
second and time count starts.
y
• The time is displayed for a certain period
when you press
CLOCK
on the remote
control.
• You can switch the system to power save
mode by setting
CLOCK
on the rear panel to
OFF.
The time settings are lost about 5 minutes after
unplugging the unit.
IPod/iPhone
LABEL SIDE
Dock Adaptor
Notes
1
2
Rear panel
Front panel
PRESET
ENTER
3
Rear panel
Note
