background image

En

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance 
with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

11 Only use attachments/accessories specified by the 

manufacturer.

12 Use only with the cart, stand, tripod, bracket, 

or table specified by the manufacturer, or sold 
with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused 

for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.

Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your 
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or 
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is 
often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group 
recommend you to avoid prolonged exposure from excessive volume levels.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK DO 

NOT OPEN

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK). NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert you to the 
presence of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to 
persons.

The exclamation point within an equilateral triangle 
is intended to alert you to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

Note to CATV system installer:

This reminder is provided to call the CATV system 
installer’s attention to Article 820-40 of the NEC that 
provides guidelines for proper grounding and, in 
particular, specifies that the cable ground shall be 
connected to the grounding system of the building, as 
close to the point of cable entry as practical.

IMPORTANT

Please record the serial number of this unit in the space 
below.
MODEL: 
Serial No.: 
The serial number is located on the rear of the unit. 
Retain this Owner’s Manual in a safe place for future 
reference.

We Want You Listening For A Lifetime

Summary of Contents for TSX-130WH - Desktop Audio System


























Reviews: