Yamaha TSX-20 Owner'S Manual Download

Page: 23 / 28

Playing CDs

Getting Started

RECEIVING RDS STATIONS

English

Optional settings for

RDS functions

The tuner has the following functions which make use of
the RDS data service. These are originally in operation
ON. However, you can turn these functions OFF, if so
desired.

defs

Select the FM band. (Refer to page 17.)

Press

DISPLAY

to display the current time.

Press

FREQ/RDS

Each time you press

PTY SEEK MODE

the display

will change as follows:

1. CT

CLOCK (ON/OFF)

The tuner corrects the time of the built-in clock
automatically by synchronizing it with the CT
data from the RDS station being received.

• If you receive an RDS station of some other

country, the built-in clock is synchronized with
the time setting of that country.

• If the built-in clock is not yet set for the current

time or was reset due to a power failure, etc., it
will be set for the time of the CT data
automatically, whether this setting is ON or OFF.

2. LOCAL

CT (ON/OFF)

If the RDS station being received employs the
local time (daylight savings time, etc.) data
service, its time is displayed in the CT mode.

3. A.M.

RDS (ON/OFF)

RDS stations are searched instead of all FM
stations by the automatic preset tuning operation
when the setting is ON. (Refer to page 10.)

4. RT SPEED: ±0

Changes the scrolling speed of radio text.
Increase the value to increase the speed, and
decrease the value to reduce the speed.

Control Range: ±0 to ±3 (Preset value: ±0)

Choose the ON or OFF function by pressing

PTY

SEEK START

and confirming it in the display.

Press

PTY SEEK START

repeatedly to change the

value for RT SPEED.
• If there is no operation for about 20 seconds, this

mode is cancelled and the frequency display
returns. If the station is broadcasting PS data, it
switches to the PS mode.

Press

FREQ/RDS

again to restore the frequency

display mode.

PTY SEEK MODE

PTY SEEK
START

FREQ/RDS

DISPLAY

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE

VOL

DISPLAY

INPUT

TUNER

START

FREQ/RDS

PRESET

RTY SEEK

TIME

RANDOM

REP

08/TSX-10E(6.12)b

01.6.12, 4:18 PM

Summary of Contents for TSX-20





























Search results

Summary of Contents for TSX-20

Reviews:

Related manuals for TSX-20

Brands by name

Popular brands

Yamaha TSX-20, Owner'S Manual

Search results

Summary of Contents for TSX-20

Reviews:

Related manuals for TSX-20

Brands by name

Popular brands