BASIC FUNCTIONS
5
En
En
■
Switching the alarm on/off
At the set time, alarm sound plays back. During playback, operations below are available.
■
Stopping the alarm
The system automatically enters standby mode under the following circumstance.
• No audio signal is input from a connecting device or when the connecting device is playing at a low volume
for a certain period (about 20 minutes).
• If no operation is performed for more than 8 hours while music is being played back or stopped.
• Disconnect the
Bluetooth
connection from the
Bluetooth
device.
Press
ALARM
.
When the alarm is on, the alarm indicator (
)
and the
RADIO
indicator light and the alarm time is
displayed for a while.
Alarm
indicator
(
)
RADIO indicator
Operations during playing back alarm sound
Press
ALARM
or .
y
• Unless you stop the alarm, the alarm stops after
60 minutes automatically.
• When you stop the alarm, the alarm time setting, etc., is
saved for convenient use next time.
• Press any button except
ALARM
and
once to stop the
beeping, and twice to stop the radio source (snooze
function). 4 minutes after the radio source is stopped, it
will start fading in again and after another minute the
beeping will resume.
• When the snooze function is activated, the display, alarm
indicator (
) and
RADIO
indicator flash.
RADIO indicator
Alarm
indicator
(
)
Auto Standby
