Play from an input source
15
Listening to DAB stations (Australia model only)
Press
RADIO
repeatedly to select
DAB
.
•
Initial scan starts automatically when you select
DAB
for the
first time.
•
When scanning is completed, the number of receivable DAB
stations is displayed momentarily, and the first station stored
is played.
1
Press
RADIO
repeatedly to select
DAB
.
When the unit cannot receive the DAB signal, “Off Air” is
displayed.
2
Press
e
or
r
to select a DAB station.
Note
•
Initial scan can also be performed from the option settings.
1 Press
OPTION
when
DAB
is selected as the input source.
2 Use
e
/
r
to select
and press
ENTER
.
3 Use
q
/
w
to select
Initial Scan
and press
ENTER
.
The initial scan display is shown.
4 Press
ENTER
to begin the initial scan.
“Completed!” is displayed when the initial scan is complete.
•
If an initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
•
This unit can receive only Band III DAB frequencies.
Frequency in MHz/Channel label
Initial scan
Tuning in DAB stations
DAB
qwer
ENTER
RADIO
OPTION
