15
En
USING THE ALARM FUNCTION
Eng
lish
Set the alarm time and alarm type
Alarm settings cannot be made when the unit is in power saving. If you want to use the alarm function, set the rear panel
CLOCK
switch to
the ON position.
Setting the alarm
1
Press
SET
.
The alarm indicator (
) will blink.
2
Set the alarm.
Set items
1
-
5
described below.
Press
–
/
+
to select a numerical value, and press
ENTER
to confirm it.
3
Complete the settings.
When you set the VOLUME for item
5
, the display will indicate
“Completed!” and your settings will be confirmed. This completes the alarm
setting.
The alarm will be turned on and the alarm indicator (
) will light.
• By pressing
SET
during this procedure, you can confirm the alarm settings with the
currently-specified values and complete the procedure.
• If you decide to cancel alarm settings mid-way through the procedure, turn the system off.
1
2
9 : 1 2
C o m p l e t e d !
3
Alarm time
Alarm indicator
Items
Setting or range
1
ALARM SELECT
* This can be selected after you’ve used “DTA Controller”
to set the alarm (
P. 16). If you’re not using “DTA
Controller,” proceed to
item
2
.
ONE DAY:
An alarm that sounds only once at the
specified time.
WEEKLY:
An alarm whose time can be specified for
each day of the week (settable only using
“DTA Controller”)
If you’ve chosen WEEKLY, this completes the alarm
setting.
2
ALARM TIME
Make settings in the order of hours
minutes.
3
ALARM TYPE
Select from BEEP, SOURCE or BEEP.
For details, refer to “3 types of alarms” (P. 14).
If you selected BEEP, proceed to item
5
.
4
ALARM SOURCE
(If you selected
BEEP or
SOURCE as the
ALARM TYPE)
iPod:
Play back music from your iPod (Refer to
“Various audio sources” (P. 14).)
The iPod connected via
Bluetooth
is not
available. Set the iPod in the iPod dock.
CD:
Play back music from a CD.
Specify the track number (data CD: folder
number) (RESUME, 1-99).
USB:
Play back music from a USB device.
Specify the folder number (RESUME, 1-999).
FM:
Play a radio station.
Specify the preset number (RESUME, 1-30).
If the selected source cannot be played back at the time
set for the alarm (e.g., the iPod is not connected), the beep
sound is played back.
If you choose RESUME when specifying the track/
folder/preset number, the last-played track/folder/station
will be played (resume playback).
5
ALARM VOLUME
Specifies the volume (5-60) of the alarm.
