17
En
Eng
lish
When the specified time has elapsed, the system will turn off automatically.
USING THE SLEEP TIMER
Press
SNOOZE/SLEEP
repeatedly to specify
the time after which the system will turn off.
You can specify 30, 60, 90 or 120 minutes.
When you select a time, the sleep timer is turned on, and the
sleep indicator (
) is shown in the front panel display.
If you press
SNOOZE/SLEEP
while the sleep timer is activated,
the sleep timer setting will be canceled.
ADJUSTING THE TONE (remote control only)
1
During playback, press the
LOW
,
MID
, or
HIGH
EQ
button on the remote control.
Select the tone to be adjusted (LOW, MID, HIGH).
2
Press
/
to adjust the tone.
3
Press
ENTER
on the remote control to
complete the operation.
You can also press the EQ button that you pressed in
Step
to complete the settings.
If you want to adjust another frequency band, return to
step
and press the EQ button for the frequency
band that you want to adjust.
ADJUSTING THE BRIGHTNESS OF THE FRONT PANEL DISPLAY
(remote control only)
Press
DIMMER
repeatedly on the remote
control.
The brightness of the front panel display will change in
the order shown below.
AUTO
1
(bright)
2
(medium)
3
(dim)
back to AUTO
When AUTO is set, the brightness of the front panel display is
adjusted automatically with the Illumination sensor (
P. 3).
Ensure that the sensor is not covered.
Press repeatedly
1
2
3
1
1
Press repeatedly
