5 - 36
CHAS
FRONT FORK
Inner tube
1. Inspect:
●
Inner tube surface
a
Score marks
→
Repair or replace.
Use #1,000 grit wet sandpaper.
Damaged oil lock piece
→
Replace.
●
Inner tube bends
Out of specification
→
Replace.
Use the dial gauge
1
.
NOTE:
The bending value is shown by one half of the
dial gauge reading.
WARNING
Do not attempt to straighten a bent inner
tube as this may dangerously weaken the
tube.
2. Inspect:
●
Piston metal
1
Wear/damage
→
Replace.
Inner tube bending limit:
0.2 mm (0.008 in)
Outer tube
1. Inspect:
●
Outer tube
1
●
Slide metal
2
Score marks/wear/damage
→
Replace
outer tube assembly.
Cap bolt
1. Inspect:
●
Cap bolt
1
●
O-ring
2
Wear/damage
→
Replace.
