5 - 47
CHAS
2. Install:
●
Handlebar grip (left)
1
Apply the adhesive to the handlebar
2
.
NOTE:
Before applying the adhesive, wipe off grease
or oil on the handlebar surface
a
with a lac-
quer thinner.
3. Install:
●
Collar
1
4. Install:
●
Throttle grip assembly
1
●
Grip cap (upper)
2
●
Throttle cables
3
On tube guide
4
.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
5. Install:
●
Throttle cable cap
1
●
Screw (throttle cable cap)
2
●
Grip cap (lower)
3
●
Screw (grip cap)
4
●
Cover (grip cap)
5
WARNING
After tightening the screws, check that the
throttle grip
6
moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
HANDLEBAR
