3 - 9
INSTRUMENT AND CONTROL FUNCTIONS
3
Rebound damping setting:
Minimum (soft):
1 clicks in direction (a)*
Standard:
12 clicks in direction (a)*
Maximum (hard):
20 clicks in direction (a)*
* With the adjusting dial fully turned
in direction (b)
Compression damping force
(TT-R125LWE)
1. Adjusting bolt
To increase the compression damping
force and thereby harden the
compression damping, turn the adjusting
knob in direction (a). To decrease the
compression damping force and thereby
soften the compression damping, turn
the adjusting knob in direction (b).
Compression damping setting:
Minimum (soft):
1 clicks in direction (a)*
Standard:
9 clicks in direction (a)*
Maximum (hard):
12 clicks in direction (a)*
* With the adjusting knob fully
turned in direction (b)
TIP
To obtain a precise adjustment, it is
advisable to check the actual total
number of clicks or turns of each
damping force adjusting mechanism.
This adjustment range may not exactly
match the specifications listed due to
small differences in production.
EAU37490
Sidestand
1. Sidestand
The sidestand is located on the left side
of the frame. Raise the sidestand or lower
it with your foot while holding the vehicle
upright.
EWA14190
The vehicle must not be ridden with
the sidestand down, or if the
sidestand cannot be properly moved
up (or does not stay up), otherwise
the sidestand could contact the
ground and distract the operator,
resulting in a possible loss of control.
Cap3_1B2_84E.pmd
7/5/2008, 15:49
9
