3 - 2
INSP
ADJ
PRE-OPERATION INSPECTION AND MAINTENANCE
*: Since these items requires special tools data and technical skills, they should be serviced.
*
1
: For USA
SERVICE NOTES:
No. 1. DRIVE CHAIN: In addition to tension and alignment, chain must be lubricated every
0.5 ~ 1.0 hour. If unit is subjected to extremely hard usage and wet weather riding, chain
must be checked constantly. See “Lubrication Intervals” for additional details.
No. 2. AIR FILTER: Remove and clean filter every 20 ~ 40 hours.
PRE-OPERATION INSPECTION AND MAINTENANCE
Before riding for break-in operation, practice or a race, make sure the machine is in good operating
condition.
Before using this machine, check the following points.
GENERAL INSPECTION AND MAINTENANCE
*
Chassis fasteners
Make sure that all nuts, bolts and screws are
properly tightened.
Tighten if necessary.
Sidestand
Check operation.
Lubricate and repair if necessary.
*
Spark arrester
*
1
Clean.
*
Front fork
Check operation and for oil leakage.
Correct accordingly.
*
Rear shock
absorber assembly
Check operation and shock absorber for oil
leakage.
Replace shock absorber assembly if necessary.
Item
Routine
Page
Brake
Check operation/adjustment.
P3-11
Engine oil
Change oil as required.
P3-5 ~ 7
Drive chain
Check alignment/adjustment/lubrication.
P3-12 ~ 13
Spark plug
Check color/condition.
P3-19
Throttle
Check for proper throttle cable operation.
P3-3
Air filter
Foam type – must be clean and damp oil always
P3-3 ~ 4
Wheels and tires
Check pressure/runout/spoke tightness/bead stopper/axle nuts.
P3-14 ~ 17
Fittings/fasteners
Check all – tighten as necessary.
P2-13
Dealer
Note
Item
Checks and maintenance jobs
Initial
Every
10 hours
(1 month)
60 hours
(6 months)
120 hours
(12 months)
3
Summary of Contents for TT-R90(R)
