background image

2-1

2

1-

SAFETY INFORMATION  

EAUU1070

Be a Responsible Owner

As the vehicle’s owner, you are respon-
sible for the safe and proper operation
of your motorcycle.
Motorcycles are single-track vehicles.
Their safe use and operation are de-
pendent upon the use of proper riding
techniques as well as the expertise of
the operator. Every operator should
know the following requirements before
riding this motorcycle.
He or she should:

Obtain thorough instructions from
a competent source on all aspects
of motorcycle operation.

Observe the warnings and mainte-
nance requirements in this Own-
er’s Manual.

Obtain qualified training in safe
and proper riding techniques.

Obtain professional technical ser-
vice as indicated in this Owner’s
Manual and/or when made neces-
sary by mechanical conditions.

Safe Riding

Perform the pre-operation checks each
time you use the vehicle to make sure it
is in safe operating condition. Failure to
inspect or maintain the vehicle properly
increases the possibility of an accident
or equipment damage. See page 5-1
for a list of pre-operation checks.

This motorcycle is designed to
carry the operator and a passen-
ger.

TIP

Although this motorcycle is designed to
carry a passenger, always comply with
the local regulations. 

_

The failure of motorists to detect
and recognize motorcycles in traf-
fic is the predominating cause of
automobile/motorcycle accidents.
Many accidents have been
caused by an automobile driver
who did not see the motorcycle.
Making yourself conspicuous ap-
pears to be very effective in reduc-
ing the chance of this type of
accident.

Therefore:

• Wear a brightly colored jacket.
• Use extra caution when you are

approaching and passing
through intersections, since in-
tersections are the most likely
places for motorcycle accidents
to occur.

• Ride where other motorists can

see you. Avoid riding in another
motorist’s blind spot.

Many accidents involve inexperi-
enced operators. In fact, many op-
erators who have been involved in
accidents do not even have a cur-
rent driver’s license.

• Make sure that you are qualified

and that you only lend your mo-
torcycle to other qualified opera-
tors.

• Know your skills and limits.

Staying within your limits may
help you to avoid an accident.

• We recommend that you prac-

tice riding your motorcycle
where there is no traffic until you

EAU10223

1GSF8199E0.book  Page 1  Thursday, March 8, 2012  9:24 AM

Summary of Contents for TTX AF115FX













































































Reviews: