PERIODIC MAINTENANCE AND ADJUSTMENT
7-28
7
EAUU1301
Replacing a rear turn signal
light bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the turn signal light sock-
et (together with the bulb) by turn-
ing it counterclockwise.
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
ECAU0080
NOTICE
_
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
_
5. Install the turn signal light socket
(together with the bulb) by turning
it clockwise.
6. Install the lens by installing the
screw.
NOTICE:
Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
EAUU1581
Replacing an auxiliary light
bulb
1. Remove panel A. (See page 7-6.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
ECAU0100
NOTICE
_
If an auxiliary light bulb of different
wattage than recommended is used,
the auxiliary light lighting may be af-
fected.
_
1. Rear turn signal light lens
1
1
ZAUU0910
1. Auxiliary light bulb socket
ZAUU0911
1
1GSF8199E0.book Page 28 Thursday, March 8, 2012 9:24 AM