PERIODIC MAINTENANCE AND ADJUSTMENT
7-16
2
3
4
5
6
7
8
9
2. If dirt or water is visible, remove
the hose, clean it, and then install
it.
EAU21236
Cleaning the spark arrester
The spark arrester should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
WARNING
EWA10980
Always let the exhaust system
cool prior to touching exhaust
components.
Do not start the engine when
cleaning the exhaust system.
1. Remove the tailpipe by removing
the screw and the gasket, and then
pulling it out of the muffler.
2. Tap the tailpipe lightly, and then
use a wire brush to remove any
carbon deposits from the spark ar-
rester portion of the tailpipe and in-
side of the tailpipe housing.
3. Check the gasket for damage, and
replace it if necessary.
4. Insert the tailpipe into the muffler.
TIP
Make sure to align the screw holes
when inserting the tailpipe.
5. Install the gasket and the screw,
and then tighten the screw.
1. Air filter check hose
1
1. Tailpipe
2. Screw
1
2
1. Tailpipe
2. Gasket
3. Screw
4. Spark arrester
1
4
2
3
10D-9-15.book 16 ページ ２０１１年３月７日 月曜日 午後３時６分
