Page 14
6.1
MIDI Settings on keyboard
In order to control S using these small MIDI files, the keyboard must be configured
accordingly.
We assume here that the MIDI channel 1 is used to control S and that the iPad is
connected to PORT 1 (MIDI A/USB 1/WLAN). If you want to use another MIDI channel or
another port, you need to specify it where needed.
2. Select the
TRANSMIT
tab.
3. Configure for
SONG
CH1
the target
PORT 1 CH1
and set a
checkmark at
CC
and
PC
.
4. For stable use, you should not send any unnecessary
MIDI signals to the port where S is connected.
Therefore you should set all others to OFF.
But at least you must avoid sending any other Control
Changes (CC) or Program Changes (PC) to the iPad on the
channel that is used to control S.
1. Press the
FUNCTION
button on the keyboard,
then select the
MIDI
tab, then press
EDIT
to
enter into the MIDI Setup.
Tip:
Save the MIDI settings in the USER section e.g. with the
name S.
