10
10
C
onnections – U
sing
T
yr
os3 with O
ther D
evices –
Tyros3 Reference Manual •
109
Assigning Specific Functions to Each Foot Pedal
The functions assigned by default to the connected footswitch or foot controller can be changed—for example, let-
ting you use the footswitch to start/stop Style playback, or use the foot controller to produce pitch bends.
1
Call up the operation display.
[FUNCTION]
→
[D] CONTROLLER
→
TAB [
Q
Q
Q
Q
][
W
W
W
W
] FOOT PEDAL
2
Use the [A]/[B] buttons to select one of three foot pedals to which the
function is to be assigned.
3
Use the [C]/[D] buttons to select the function to be assigned to the
pedal specified in step 2.
For information on available parameters, see pages 110–111.
4
Use the [1
▲▼
]–[8
▲▼
] buttons to set the details of the selected func-
tions (the part for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you’ve
connected to the Tyros3. For example, pressing down on one pedal may turn
the selected function on, while pressing a different make/brand of pedal may
turn the function off. If necessary, use this setting to reverse the operation.
Footswitch/Foot Controller Settings
2
3
5
4
You can also assign the other functions
to the pedal—punch in/out of Song/
Hard Disk Recorder (
,
Registration Sequence (
assign multiple functions to the pedal,
the priority is: Punch in/out of Song or
Hard Disk Recorder
→
Registration
Sequence
→
Functions assigned here.
NOTE
Summary of Contents for Tyros3
Page 1: ...EN Reference Manual ...
