background image

English

1

To ensure the finest performance, please read this manual
carefully.  Keep it in a safe place for future reference.

2

Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold.  Avoid sources of hum (transformers,
motors).  To prevent fire or electrical shock, do not expose
to rain or water.

3

Do not operate the unit upside-down.  It may overheat,
possibly causing damage.

4

Never open the cabinet.  If a foreign object drops into the
unit, contact your dealer.

5

This player should not be placed on appliances, such as
amplifiers, that produce heat, or placed in a cabinet that
impedes the flow or air. This may result in a failure in this
player. Install the player in a well ventilated place. In
addition, do not place objects on the player.

6

Do not use force on switches, knobs or cords.  When
moving the set, first turn the unit off.  Then gently
disconnect the power plug and the cords connecting to
other equipment.  Never pull the cord itself.

7

Do not attempt to clean the unit with chemical solvents;
this might damage the finish.  Use a clean, dry cloth.

8

Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.

9

To prevent lightning damage, unplug the power cord and
remove the antenna cable during electrical storms.

10

The generated digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.

11

Voltage selector (General model only)

The voltage selector (on the rear panel of this unit)
must be correctly set to the voltage used locally
before making any connection to the AC power
supply.

This unit is designed for home use only. Do not use this
unit for business purposes. 

NOTE:
Please check the copyright laws in your country before
recording from records, compact discs, radio, etc. 
Recording of copyrighted material may infringe copyright
laws.

WARNING

To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.  Refer
servicing to qualified personnel only.

DANGER
Invisible laser radiation when open and interlock failed or 
defeated.
Avoid direct exposure to beam.

CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.

This compact disc player is 
classified as a CLASS 1 LASER
product.
The CLASS 1 LASER
PRODUCT label is located on
the rear exterior. (China and
Singapore models)

Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.

CAUTION
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.

Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*

* This output is the value measured at a distance of about

200mm from the objective lens surface on the Optical Pick-
up Block.

CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.

CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc
tray and close the tray by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the display indicates as follows.

Never switch off the power if the display is not pictured as
above, otherwise the unit will break down during moving
because the internal mechanism is not locked.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

MUSIC

DISC

CLASS 1 LASER PRODUCT

3

Summary of Contents for VCD-120K
























Reviews: