8-37
8
EBU32550
Brake light switch adjustment
The brake light switch, which is activated by
the brake pedal, is properly adjusted when
the brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in di-
rection (a). To make the brake light come on
later, turn the adjusting nut in direction (b).
EBU32560
Cable inspection and lubrication
WARNING
EWB03380
Damaged cables could restrict operation,
which may cause an accident or injury. In-
spect control cables frequently and re-
place damaged cables. Corrosion can
result when the outer covering of control
cables becomes damaged. Cables can
also become frayed or kinked.
Lubricate the cable ends. If the cables do not
operate smoothly, ask a Yamaha dealer to re-
place them.
EBU32570
Brake pedal and accelerator pedal lu-
brication
Lubricate the pivoting parts.
1. Brake light switch
2. Adjusting nut
1
(a)
(b)
2
Recommended lubricant:
Yamaha cable lubricant or other suitable
cable lubricant
UB4210E0.book Page 37 Tuesday, April 28, 2015 1:25 PM