PERIODIC MAINTENANCE AND MINOR REPAIR
6-13
6
4. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
_
An oil filter wrench is available at a
Yamaha dealer.
_
5. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
_
Make sure that the O-ring is properly
seated.
_
6. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
7. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
1. Oil filter cartridge
2. Oil filter wrench
1. O-ring
1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lbf)
E_5GK.book Page 13 Friday, May 31, 2002 10:59 AM
Summary of Contents for VMAX VMX12R
