2 - 4
REFERENCE
Chapter 2 SYSTEM Mode
TONE GENERATOR SETTINGS
SYSTEM
➝
F1
: TG
Sets the properties of the tone generator.
Master Tune
420.0 ~ 460.0 Hz
Controller Init
off, on
Controller Hook
off, on
AT Scene SW
off, on
Description
•
Use this function to set up the tone generator.
•
Master Tune: Selects the frequency for keyboard note A3. The VP1 tunes the
entire system relative to this frequency.
•
Controller Init: If “on”, the VP1 automatically switches controller settings to the
“initial” scene (
➝
REFERENCE: 1-14) when you switch to a new voice. If “off”,
the VP1 reads and applies the physical controller settings each time you select a
new voice.
•
Controller Hook: Determines how physical controllers become effective after a
scene change. If the setting is “off”, each physical controller becomes effective as
soon as you move it. (Controller LEDs are always green.) If the setting is “on”, the
physical controller does not become effective until it moves past the internal
controller position established by the scene.
•
AT Scene SW: Determines whether aftertouch and touch-EG data are affected by
scene change. If the setting is “off”, scene changes will have no affect on internal
controller values for aftertouch and touch EG.
•
Press
EXIT
or
PLAY
to return to PLAY mode.
•
Press
F2
~
F6
to change to another SYSTEM-mode function.
SYSTEM Functions
Summary of Contents for VP1
