Trouble Recovery
72
1.
Stop the engine.
2.
Remove the top cowling.
3.
Disconnect the water detection switch
coupler.
CAUTION:
ECM01570
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
4.
Unscrew the filter cup from the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
5.
Drain the water in the filter cup by soak-
ing it up with a rag.
NOTE:
Properly dispose of the rag.
6.
Firmly screw the filter cup onto the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when screwing the filter cup onto
the filter housing.
7.
Connect the water detection switch cou-
pler securely until a click is heard.
8.
Install the top cowling.
9.
Start the engine and make sure that the
water separator warning indicator re-
1. Water separator warning indicator
1. Water detection switch coupler
1
ZMU05502
1. Filter cup
2. Water detection switch lead
1. Water detection switch coupler
1
2
ZMU05501
1
ZMU05500
Summary of Contents for VZ150
