33
●
MIDI DATA FORMAT
Please note that there are a few changes in the “MIDI
DATA FORMAT” specifications (see the
W5/W7
Technical Information
booklet, page 39). Items
shaded in gray, below, are the new additions to
Version 2.
Technical Information
– page 39
1.2 Channel Message
1.2.1 Transmission
1.2.1.1 Note on/off
Transmission note range = C-2(0)...G8(127)
Velocity range
= 1...127
1.2.1.2 Control change
Control change is output via MIDI when the following controllers are used.
ctrl#
1
4
7
11
64
1
〜
119
1
〜
119
parameter
Modulation Wheel
Foot Controller
Foot Volume
Expression
Sustain Switch
Continuous Slider
Foot Controller
data rng
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
，
127
0
〜
127
0
〜
127
Technical Information –
page 40
1.2.1.3 Program change
When a voice is selected, the bank select and program change is
transmitted according to the following chart.
GM
PRESET 1
INTERNAL
SONG
EXTERNAL
PRESET 2
PRESET 3
GM
PRESET
INTERNAL
SONG
EXTERNAL
Normal Voice
Drum Voice
Bank No. MSB / LSB
0($00) / 0($00)
1($01) / 0($00)
2($02) / 0($00)
3($03) / 0($00)
4($04) / 0($00)
5($01) / 0($00)
6($01) / 0($00)
127($7F) / 0($00)
17($11) / 0($00)
18($12) / 0($00)
19($13) / 0($00)
20($14) / 0($00)
PGM CNG No.
1
〜
128($00
〜
$7F)
↓
↓
↓
↓
↓
↓
*1
*2
*2
*2
*2
Technical Information
– page 40
1.2.2.2 Control change
Parameters in the table below can be controlled by MIDI.
data rng
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0
〜
127
0 , 127
parameter
Bank Select MSB
Bank Select LSB
Modulation wheel
Foot control
Data Entry
Inst Volume
Pan
Expression
Harmonic Content
Release Time
Attack Time
Brightness
Portament Control
EF Send 1 (Reverb)
EF Send 2 (Chorus)
EF Send 3 (Delay/Rev)
MIDI Control 1
MIDI Control 2
Sustain Switch
cntrl#
0
32
1
4
6
7
10
11
71
72
73
74
84
91
93
94
1
〜
119
1
〜
119
64
*1
*1
*1: See Program Change 1.2.1.3
1.2.2.3 Program Change
When a program change message is received, the W5/W7 performs the
operations below. Three types of reception modes can be set with the System
Setup.
In Store Mode and Voice Edit Mode program changes will not be received.
1) Off: Program changes will not be received.
2) Ignore Bank Select: Individual program number (001 ~ 128) change messages
will be received but bank select messages will be ignored.
3) On: Bank select and program change messages will be received according to
the following chart.
GM
PRESET 1
INTERNAL
SONG
EXTERNAL
PRESET 2
PRESET 3
GM
PRESET
INTERNAL
SONG
EXTERNAL
Normal Voice
Drum Voice
Bank No. MSB / LSB
0($00) / 0($00)
1($01) / 0($00)
2($02) / 0($00)
3($03) / 0($00)
4($04) / 0($00)
5($01) / 0($00)
6($01) / 0($00)
127($7F) / 0($00)
17($11) / 0($00)
18($12) / 0($00)
19($13) / 0($00)
20($14) / 0($00)
PGM CNG No.
1
〜
128($00
〜
$7F)
↓
↓
↓
↓
↓
↓
*1
*2
*2
*2
*2
Technical Information
– page 41
2.2 Parameter Change
The W5/W7 will transmit and receive the eight types of parameter change messages
listed below. When recording is activated and “All Track” and “Punch-in” are not
designated, parameter change messages will be transmitted when the [SONG],
[VOICE], [SELECT], [SOLO] and [TRACK 1]~[TRACK 16] buttons are pressed.
However, 6) Switch Remote will only receive and it will act the same function as the
panel switches.
1). Song/Multi Data
2). Normal Voice Data
3). Drum Voice Data
4). Element Data
5). Setup Data
6). Switch Remote
7). Master Tuning
8). Universal System Exclusive Message
Except for Device Number off, the parameter change reception cannot be turned off
with each MIDI switch.
