– 18 –
–
+
ELEC
IGNITION SYSTEM
BOTH MEET
SPECIFICATION
●
Connect the pocket tester (
Ω ×
1k) to the
ignition coil.
Tester (+) lead
→
Orange lead terminal
Tester (–) lead
→
Spark plug lead
●
Check that the secondary coil has the
specified resistance.
Secondary coil resistance:
6.32 ~ 9.48 k
Ω
at 20 °C (68 °F)
Replace the ignition coil.
CORRECT
7.Engine stop switch
Refer to “CHECKING THE SWITCH”.
INCORRECT
Replace the handlebar switch (left).
CORRECT
8.Main switch
Refer to “CHECKING THE SWITCH”.
INCORRECT
Replace the main switch.
9.Pickup coil resistance
●
Disconnect the AC magneto coupler from
the wire harness.
●
Connect the pocket tester (
Ω ×
100) to the
pickup coil terminal.
Tester (+) lead
→
White/Red terminal
1
Tester (–) lead
→
White/Green terminal
2
MEETS
SPECIFICATION
●
Check the pickup coil for the specified
resistance.
Pickup coil resistance:
459 ~ 561
Ω
at 20 °C (68 °F)
(White/Red – White/Green)
*
OUT OF SPECIFICATION
Replace the pickup coil/starter assembly.