7-37
E
–
+
ELEC
INDICATION SYSTEM
Oil level gauge
1. Check:
●
Oil level gauge
Not operating
→
Replace the multi-
function meter.
Checking steps:
●
Supply DC 12 voltage to the natural
color six-pin connector (+: red, –:
black) with a battery.
●
Disconnect the white two-pin connec-
tor (blue and black leads).
●
Connect the blue and black terminals
with a jumper lead
1
.
●
Connect the green and red terminals
with a jumper lead
2
.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
●
Remove the jumper lead
1
from the
white two-pin connector.
●
Disconnect the jumper lead
2
and
then connect it to green and red ter-
minal again.
●
Make sure the oil symbol
3
and
“WARNING” lamp
4
blinks, and the
buzzer sounds intermittently.
WARNING
YAMAHA
8
7
6
5
4
3
2
1
MPH
FUEL
HOUR
x1000r/min
MULTI
D SPLAY
4
3
