8-40
E
HULL
HOOD
EXHAUST SYSTEM
SERVICE POINTS
Exhaust system inspection
1. Inspect:
●
Water lock band
Cracks/damage
→
Replace.
2. Inspect:
●
Rubber hoses
Burns/cracks/damage
→
Replace.
3. Inspect:
●
Water lock
Cracks/leaks
→
Replace.
4. Inspect:
●
Water tank
Cracks/damage/leaks
→
Replace.
Exhaust component parts sub-assembly
1. Install:
●
Exhaust outlet
●
Rubber hose
●
Water tank
NOTE:
●
Insert the exhaust outlet 45 mm (1.8 in)
a
into the rubber hose.
●
Make sure that there is a surface distance
of 10 mm (0.4 in)
b
between the parting
lines of the exhaust outlet and the rubber
hose.
●
Insert the water tank 45 mm (1.8 in)
c
into
the rubber hose.
●
Make sure that there is a surface distance
of 45 mm (1.8 in)
d
between the parting
lines of the water tank and rubber hose.
