8-46
E
HULL
HOOD
ENGINE MOUNT
Insert nut
NOTE:
Use the insert nut when:
●
A pop nut which was attached to the hull
slipped off or,
●
When a bolt which was fastened to an
insert nut or pop nut broke.
●
Nut
1
●
Thread direction
2
●
Slot to be threaded
3
NOTE:
Drilling size
Part No.
Part
name
Remarks
EW2-62733-09
Nut
Stainless
steel, M6
Material
Pilot hole diameter
FRP or SMC
9.1 ~ 9.2 mm (0.36 in)
Brass
9.4 mm (0.37 in)
Example 1:
NOTE:
Before attempting to install the insert nut,
refer to “WATER VEHICLE FRP REPAIR
MANUAL”.
The insert nut is used to repair the pop nut
designed for the ride plate.
(By repairing the FRP portion, the insert nut
can be used for all models.)
1. Remove:
●
Pop nut
2. Clean the surface to be scarfed and the
inside of the hull with acetone.
3. Scarf the shaded portion of the hull.
