3-4
INSP
ADJ
E
CONTROL SYSTEM
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left and make sure
that the trolling speed does not increase.
Choke cable inspection and adjustment
1. Check:
●
Choke lever operation
Incorrect operation
→
Adjust.
2. Adjust:
●
Choke lever operation
Checking steps:
●
Check that the choke lever moves back
slightly when it is fully opened.
●
Check that the inner cable has some
slack when the choke lever is com-
pletely closed.
Adjustment steps:
●
Loosen the locknut
1
.
●
Screw the adjuster
2
fully into the
bracket.
●
Align the choke lever end
a
within the
line marks
b
.
●
Turn out the adjuster
2
until the inner
cable is taut.
NOTE:
If the inner cable is difficult to make taut
using the adjuster
2
, adjust the choke
lever so that the cable is taut. The cable
must be taut when the choke lever end
a
is positioned within the line marks
b
.
Reset the adjuster if necessary.
●
Tighten the locknut
1
.
