4-16
FUEL
E
CARBURETOR UNIT
SERVICE POINTS
Throttle valve synchronization inspection
and adjustment
1. Check:
●
Throttle valve synchronization
Not synchronized
→
Adjust.
Checking steps:
●
Loosen the remote throttle stop screw
1
until untouched the screw end from
the throttle lever.
●
Check the each throttle valve is fully
closed.
2. Adjust:
●
Throttle valve synchronization
Adjustment steps:
●
Loosen the remote throttle stop screw
1
until untouched the screw end from
the throttle lever.
●
Loosen the screws
2
.
NOTE:
Make sure that the throttle valves are in
the fully closed position.
●
Tighten the screws
2
.
T
R
.
Screw:
2 Nm (0.2 m • kgf, 1.4 ft • lb)
●
Turn in the remote throttle stop screw
to the original position.
