5-35
E
POWR
PISTONS
2. Measure:
• End gap
(using a thickness gauge
1
)
Out of specification
→
Replace the pis-
ton rings as a set.
NOTE:
Push the piston ring into the cylinder with the
piston crown.
End gap:
0.45–0.60 mm (0.018–0.024 in)
Piston pin and bearing inspection
1. Check:
• Piston pins
• Bearings
Signs of heat discoloration
→
Replace.
2. Measure:
• Piston pin outside diameter
(using a micrometer
1
)
Out of specification
→
Replace.
Piston pin outside diameter:
Standard:
21.995–22.000 mm
(0.8659–0.8661 in)
Limit:
21.990 mm (0.8657 in)
3. Check:
• Piston-pin-to-piston free play
(with the piston pin in the piston as
shown)
Free play
→
Replace the piston pin, pis-
ton, or both.
Summary of Contents for WaveRunner GP1300R
