7-15
E
–
+
ELEC
IGNITION SYSTEM
2. Measure:
• Pickup coil output peak voltage
Below specification
→
Replace the
pickup coil.
Above specification
→
Replace the
ECM.
NOTE:
To crank the engine, connect the engine shut-
off cord (lanyard) to the engine shut-off switch,
and then press the start switch and engine
stop switch simultaneously.
3. Measure:
• Lighting coil output peak voltage
Below specification
→
Replace the light-
ing coil.
NOTE:
To crank the engine, connect the engine shut-
off cord (lanyard) to the engine shut-off switch,
and then press the start switch and engine
stop switch simultaneously.
Test harness (6 pins):
YB-06849
Test harness SM6195021-6
(6 pins):
90890-06849
Pickup coil output peak voltage:
White/red (W/R) – Black (B)
White/black (W/B) – Black (B)
White/yellow (W/Y) – Black (B)
r/min
Unloaded
Loaded
Cranking
2,000
3,500
V
6.0
6.0
24
40
Lighting coil tester (3 pins):
YB-06870
Test harness SMT250-3 (3 pins):
90890-06870
Lighting coil output peak voltage:
Green (G) – Green (G)
r/min
Unloaded
Loaded
Cranking
2,000
3,500
V
9.0
7.5
12.5
12.5
Summary of Contents for WaveRunner GP1300R
