manualshive.com logo in svg

Yamaha WC42260, Owner'S Manual

The Yamaha WC42260 Owner's Manual is a comprehensive guide designed to help you effortlessly navigate and operate your Yamaha WC42260. With step-by-step instructions and detailed illustrations, this manual ensures an optimal user experience. Download your free copy of the manual from our website 88.208.23.73:8080, and unlock the full potential of your Yamaha WC42260.

Share
Download
background image

 

 

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN 
ACCORDANCE WITH THE FOLLOWING CODE:

          GREEN-AND-YELLOW :      EARTH

          BLUE :                                     NEUTRAL

          BROWN :                                LIVE

As the colours of the wires in the mains lead of this apparatus may 
not correspond with the coloured markings identifying the terminals in 
your plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be 
connected to the terminal in the plug which is marked by the letter E 
or by the safety earth symbol        or coloured GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal 
which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the 
terminal which is marked with the letter L or coloured RED.

*  This applies only to products distributed by YAMAHA KEMBLE 

MUSIC (U.K.) LTD.

 

 

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC 

requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST 

be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with 

these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with 
other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may 
cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all 
installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and  “ON”, please try to eliminate the 
problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on 
different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in 
is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer 
authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service 
Division, 6600 Orangethorpe Ave, Buena Park, CA 90620

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

 

ADVARSEL!
Lithiumbatteri—Eksplosionsfare ved fejlagtig 
håndtering. Udskiftning må kun ske med batteri 
af samme fabrikat og type. Levér det brugte 
batteri tilbage til leverandoren.

VARNING
Explosionsfara vid felaktigt batteribyte. Använd 
samma batterityp eller en ekvivalent typ som 
rekommenderas av apparattillverkaren. 
Kassera använt batteri enligt fabrikantens 
instruktion.

VAROITUS
Paristo voi räjähtää, jos se on virheellisesti 
asennettu. Vaihda paristo ainoastaan 
laitevalmistajan suosittelemaan tyyppiin. Hävitä 
käytetty paristo valmistajan ohjeiden 
mukaisesti.

 

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(mercury)

This product contains a high intensity lamp that contains a small amount of mercury. Disposal of this material may be regulated 
due to environmental considerations. For disposal information in the United States, refer to the Electronic Industries Alliance web 
site: www.eiae.org

 

NEDERLAND / THE NETHERLANDS

 

• Dit apparaat bevat een lithium batterij voor geheugen back-up.

• This apparatus contains a lithium battery for memory back-up.

• Raadpleeg uw leverancier over de verwijdering van de batterij op het 

moment dat u het apparaat ann het einde van de levensduur of gelieve 
dan contact op te nemen met de vertegenwoordiging van Yamaha in 
uw land.

• For the removal of the battery at the moment of the disposal at the end 

of life please consult your retailer or Yamaha representative office in 
your country.

• Gooi de batterij niet weg, maar lever hem in als KCA.

• Do not throw away the battery. Instead, hand it in as small chemical 

waste.

 

(lithium disposal)

Summary of Contents for WC42260




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for WC42260

MA lighting grandMA3 Installation Manual preview
grandMA3
Brand: MA lighting Pages: 6
MA grandMA3 Manual preview
grandMA3
Brand: MA Pages: 3
Yellowtec intellimix Briefing Book preview
intellimix
Brand: Yellowtec Pages: 23
Akura APTMIC110AR Instruction Manual preview
APTMIC110AR
Brand: Akura Pages: 10
Stanley-FX BabyBlue Echotapper User Manual preview
BabyBlue Echotapper
Brand: Stanley-FX Pages: 5
Tesla MX505WXB User Manual preview
MX505WXB
Brand: Tesla Pages: 44
Voodoo Lab SPARKLE DRIVE User Manual preview
SPARKLE DRIVE
Brand: Voodoo Lab Pages: 2
Prostage WahWah User Manual preview
WahWah
Brand: Prostage Pages: 16
BYOC Octavefuzz Instructions Manual preview
Octavefuzz
Brand: BYOC Pages: 12
Omnitronic 1422FX User Manual preview
1422FX
Brand: Omnitronic Pages: 44
RONDELL RDE-1350 Manual Instruction preview
RDE-1350
Brand: RONDELL Pages: 20
Behringer EUROPOWER PMP560M Quick Start Manual preview
EUROPOWER PMP560M
Brand: Behringer Pages: 17
Nesco HM-350 Instruction Manual preview
HM-350
Brand: Nesco Pages: 16
Altrad ATIKA Compact 140L Original Instructions Manual preview
ATIKA Compact 140L
Brand: Altrad Pages: 76
Shure SCM262E User Manual preview
SCM262E
Brand: Shure Pages: 10
Philips DCM3100 Brochure & Specs preview
DCM3100
Brand: Philips Pages: 3
Philips DCM3020/79 Quick Manual preview
DCM3020/79
Brand: Philips Pages: 3
Philips DCM377 User Manual preview
DCM377
Brand: Philips Pages: 16

Brands by name

Popular brands

Load more brands